| PDF Export | |
Mat.No. 1.1121/DIN Ck10/AISI 1010
CK10 is a plain carbon steel with a nominal 0.10% carbon content. It is a relatively low strength steel, but it may be quenched and tempered for increased strength. Designation by Standards.
| Mat. No. | DIN | EN | AISI |
| 1.1121 | Ck10 | - | 1010 |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 0.10 | max. 0.40 | 0.45 | - | - | - | - | - | - |
Applications
The low carbon steels, such as CK10, are used for applications such as cold headed fasteners and bolts.
Physical properties (average values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210Density [g/cm3]: 7.85
Soft Annealing
Heat to 800-840oC, cool slowly.
Hardening
This steel is generally used in the annealed or case-hardened condition. It may be heat treated, quenched and tempered but the cost for so doing is generally not worth the result.
Tempering
Tempering temperature: 320-530oC.
Forging
Hot forming temperature: 1050-850oC.
Machinability
Machinability of CK10 steel is fairly good, especially in the cold drawn or cold worked condition. Based upon carbon steel AISI 1112 as a reference that is considered 100% machinable (easily machined) the CK10 steel has a rating of 55%.
Corrosion Resistance
This is a plain carbon steel and has no corrosion resistance. It will rust unless protected.
Welding
CK10 steel may be welded by all of the standard welding techniques.Cold working
CK10 is easily cold worked by traditional means. Following severe cold working a stress relief, or full, anneal should be performed.
Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes. There is no representation that the recipient of this literature will receive updated editions as it becomes available.
CK10 is a plain carbon steel with a nominal 0.10% carbon content. It is a relatively low strength steel, but it may be quenched and tempered for increased strength. Designation by Standards.
| Mat. No. | DIN | EN | AISI |
| 1.1121 | Ck10 | - | 1010 |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 0.10 | max. 0.40 | 0.45 | - | - | - | - | - | - |
Applications
The low carbon steels, such as CK10, are used for applications such as cold headed fasteners and bolts.
Physical properties (average values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210Density [g/cm3]: 7.85
Soft Annealing
Heat to 800-840oC, cool slowly.
Hardening
This steel is generally used in the annealed or case-hardened condition. It may be heat treated, quenched and tempered but the cost for so doing is generally not worth the result.
Tempering
Tempering temperature: 320-530oC.
Forging
Hot forming temperature: 1050-850oC.
Machinability
Machinability of CK10 steel is fairly good, especially in the cold drawn or cold worked condition. Based upon carbon steel AISI 1112 as a reference that is considered 100% machinable (easily machined) the CK10 steel has a rating of 55%.
Corrosion Resistance
This is a plain carbon steel and has no corrosion resistance. It will rust unless protected.
Welding
CK10 steel may be welded by all of the standard welding techniques.Cold working
CK10 is easily cold worked by traditional means. Following severe cold working a stress relief, or full, anneal should be performed.
Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes. There is no representation that the recipient of this literature will receive updated editions as it becomes available.
